Ultra Violet Light Installation Guide For UV Water Filter Systems [VIDEO]

This article serves as an overview of how to install an Ultraviolet Light for Whole House Rainwater Tank Systems.

      1. Unbox your UV light system and unwrap the mounts.
      2. Unwrap the holders for the housing.
      3. Mount the holders to the wall. We recommend a horizontal installation but if yous're installing information technology vertically, make sure the globe/power leads go out of the tiptop, never the bottom.
      4. Put the prune locks on.
      5. Unscrew both ends.
      6. Unwrap the glass thimble.
      7. Gently slide the glass thimble into the UV system.
      8. Unwrap the O-Rings and put one on each end of the glass thimble. These push up against the thread when you put the caps on.
      9. Put the stainless steel caps back on either side of the UV organisation and tighten them up equally tight as y'all can past manus. You must seal it properly.
      10. Wrap some thread tape around the thread of both the in and out pipes. Connect upward the in and out pipes.
      11. Turn the water on.
      12. Flush the toilet, turn the shower on, plow on some of your taps and check that the UV arrangement isn't leaking.
      13. Once you've established there are no leaks, plow the water dorsum off.
      14. Remove the earth from the packaging.
      15. Slide the globe into the thimble. If you take mounted it vertically, make sure yous don't drop the globe in, it will break the thimble.
      16. Plug the controller into an RCD, and then plug the RCD into the power outlet.
      17. Mountain the controller somewhere and brand sure information technology's going to stay dry.
      18. Plug the power cord/controller into the bulb and button information technology into the housing.
      19. Put the prophylactic cap on to seal information technology upward.
      20. Take off the nut where the earth wire goes and connect the earth wire.
      21. Put the nut back on and tighten up the world wire.
      22. Ensure the ability cord is directed down, so any condensation won't trickle into the globe.

At present yous know how your installation will take place. In the following video, we cover everything you need to know, including instructions for setting up the PVC pipework.

When you're ready, click hither to watch the total stride by step installation guide for installing your UV calorie-free.

Click here to check out our total collection of UV light systems.

Previous articleNext article